Print

images/inst8.28.8//724col.gif


ATI Proprietary Linux Installer


The ATI Proprietary Linux Installer makes installing the ATI Proprietary Linux driver a much simpler and user friendly experience. The new ATI Proprietary Linux Installer provides two modes of installation. The Install Driver option provides a simple driver installation process, and the Generate Distribution Specific Driver Package provides a simple way to generate a package for your distribution.


Note: ATI recommends that you create a central location for your ATI Proprietary Linux driver downloads.


Note: ATI recommends you uninstall the ATI Proprietary Linux Driver before installing a newer version


Note: `fglrxconfig` is no longer provided with the ATI Proprietary Linux Driver Installer. To configure your display devices, use `aticonfig`.

Operating Systems Distributions Supported

The latest version of the ATI Proprietary Linux driver is designed to support the following Linux distributions:


Note: The ATI Proprietary Linux driver may install on a number of other Linux distributions. Refer to the installation instructions for more information.


Note: ATI has accepted contributed packaging scripts to allows creation of other packages, but does not necessarily test, verify or warrant the reliability. Currently Red Hat Enterprise Linux suite and Novell/SuSE product suite are supported Linux distributions

Minimum System Requirements

Before attempting to install the ATI Proprietary Linux driver, the following software must be installed:


Note: If a Linux 2.6.11 or newer kernel was built with CONFIG_AGP enabled, the kernel AGP frontend is required to load the fglrx kernel module. To identify whether your kernel was built with CONFIG_AGP enabled, look for CONFIG_AGP=y in the kernel config file, or if the 'agpgart' module loaded.

System Recommendations

For best performance and ease of use, ATI recommends the following:


Note: The following 32 bit packages must be installed in order for 64 bit drivers to install and work properly:
· XFree86-Mesa-libGL
· libstdc++
· libgcc
· XFree86-libs
· fontconfig
· expat
· freetype
· zlib


Note: In order to use the fglrx internal AGP support, you have to make sure that the kernel agpgart support is not active, i.e. it is not compiled into the kernel and the kernel modules are not loaded. If the fglrx kernel module detects that the kernel agpgart support is active, it will automatically use that even if its internal AGP support is requested in order to avoid conflicts that can cause problems under some circumstances.

Uninstalling the ATI Linux Proprietary Driver

Un-installing the ATI Linux Proprietary Driver is dependent on the mode of initial installation.

Automatic or Custom Driver Installations

If the ATI Proprietary Linux Driver was installed using either the Automatic or Custom options, then do the following:

  1. Launch the Terminal Application/Window and navigate to the /usr/share/fglrx folder.
  2. With super user permissions, enter the command "sh ./fglrx-uninstall.sh"

You have now successfully uninstalled the ATI Linux Proprietary Driver.

Package Generation

If the initial installation of the driver was done via the Operating Systems package management software (rpm, apt, etc.) then please use that package management software to remove the ATI Proprietary Linux Driver.

Install Driver Option

The Install Driver option provides two driver installation options. The Automatic option installs all driver components, and the Custom option allows for the selection of driver components to be installed.

Automatic Driver Installation Option

To install the ATI Proprietary Linux driver using the Automatic option, follow these steps:

  1. Launch the Terminal Application/Window and navigate to the ATI Proprietary Linux driver download.
  2. Enter the command sh ./ati-driver-installer-8.28.8.run to launch the ATI Proprietary Linux driver installer. The ATI Proprietary Linux Driver Setup dialog box is displayed.



Note: You must be logged in with super user privileges in order to successfully install the ATI Proprietary Linux driver.

    1. Select Install Driver and click Continue. The ATI License Agreement is displayed.
    2. Read the License Agreement and Click I Agree to continue the installation, or Cancel to terminate the installation. The Mode of Installation Dialog Box is displayed.

    3. Select Automatic and click Continue. The ATI Proprietary Linux Driver is installed, and the Installation Complete Dialog box is displayed.

    4. Click View HTML Release Note for last minute driver information, or Exit to close the ATI Proprietary Linux Driver Installer.
    5. Launch the Terminal Application/Window and run /usr/X11R6/bin/aticonfig --initial to configure the driver.
    6. Reboot your system.

    You have successfully installed the ATI Proprietary Linux Driver.

    Custom Driver Installation Option

    The Custom option allows for the selection of driver components to be installed. To install the ATI Proprietary Linux Driver using the Custom option, follow these steps:

    1. Launch the Terminal Application/Window and navigate to the ATI Proprietary Linux driver you have downloaded
    2. Enter the command sh ./ati-driver-installer-8.28.8.run to launch the ATI Proprietary Linux driver installer. The ATI Proprietary Linux Driver Setup dialog box is displayed


    Note: You must be logged in with super user privileges in order to successfully install the ATI Proprietary Linux driver.

      1. Select Install Driver and click Continue. The ATI License Agreement is displayed.
      2. Read the License Agreement and Click I Agree to continue the installation, or Cancel to terminate the installation. The Mode of Installation Dialog Box is displayed.

      3. Select Custom and click Continue. The ATI Proprietary Linux Driver Setup options is displayed.

      4. Select the driver components to be installed and click Continue. The ATI Proprietary Linux Driver is installed, and the Installation Complete Dialog box is displayed.

      5. Click View HTML Release Note for last minute driver information, or Exit to close the driver installer.
      6. Launch the Terminal Application/Window and run /usr/X11R6/bin/aticonfig --initial to configure the driver.
      7. Reboot your system.

      You have successfully installed the ATI Proprietary Linux Driver.

      Generate Distribution Specific Driver Package Option

      The Generate Distribution Specific Driver Package option provides a simple way to generate a package specific for your distribution. This option uses the policies set by the operating system vendor and allows for maximum compatibility with the distribution. To install the ATI Proprietary Linux Driver using the Generate Distribution Specific Driver Package option, follow these steps:

      1. Launch the Terminal Application/Window and navigate to the ATI Proprietary Linux driver download.
      2. Enter the command sh ./ati-driver-installer-8.28.8.run to launch to the ATI Proprietary Linux driver installer The ATI Proprietary Linux Driver Setup dialog box is displayed


      Note: You must be logged in with super user privileges in order to successfully install the ATI Proprietary Linux driver.

        1. Select Generate Distribution Specific Driver Package and click Continue. The ATI License Agreement is displayed.
        2. Read the License Agreement and Click I Agree to continue the installation, or Cancel to terminate the installation. The Package Generation Dialog Box is displayed

        3. Select the distribution package to be generated and click Continue. The package generation is started and the Package Generation Completed dialog box is displayed.

        4. Click Exit to close the ATI Proprietary Linux Driver Installer.
        5. You are now ready to install the generated distribution package using the distribution's package management system.
        6. After installing the generated distribution package, launch the Terminal Application/Window and run aticonfig --initial to configure the driver.
        7. Reboot your system.

        You have successfully generated and installed a distribution specific driver package..

        Driver Update Notification

        To receive driver notifications, add the following RSS feed to your RSS reader: http://www.ati.com/online/rss/atilinuxdriver.rss?OTC-rssfeedlinux


        Note: In order to receive notifications you will need to have an RSS reader installed.

        ATI Customer Care

        The ATI Customer Care website provides accurate and up-to-date product support for optimum usability and performance. Technical issues are categorized and can be personalized to enhance user experience. The new ATI Customer Care Website can be found at: support.ati.com

        To view a known or resolved issue, do the following:

        1. Go to: support.ati.com. The ATI Customer Care web page is displayed.
        2. In the top left hand pane, click Advanced Search. The Advanced Search pane is displayed.
        3. Under Search Type: Select the By: ID option.
        4. Enter the Topic number.
        5. Click Go.

        Linux Feedback Program

        The ATI Proprietary Linux driver releases may incorporate suggestions received through the Linux feedback program.
        Please refer to https://support.ati.com/ics/support/default.asp?deptID=894&task=knowledge&questionID=1714 to provide us with feedback.


        ATI Technologies Inc.
        http://www.ati.com
        Voice: (905) 882-2600
        Fax: (905) 882-2620